Respuesta :
Complete Question:
A metal plate of 400 mm in length, 200mm in width and 30 mm in depth is to be machined by orthogonal cutting using a tool of width 5mm and a depth of cut of 0.5 mm. Estimate the minimum time required to reduce the depth of the plate by 20 mm if the tool moves at 400 mm per second.
Answer:
[tex]T_{min} =[/tex] 26 mins 40 secs
Explanation:
Reduction in depth, Δd = 20 mm
Depth of cut, [tex]d_c = 0.5 mm[/tex]
Number of passes necessary for this reduction, [tex]n = \frac{\triangle d}{d_c}[/tex]
n = 20/0.5
n = 40 passes
Tool width, w = 5 mm
Width of metal plate, W = 200 mm
For a reduction in the depth per pass, tool will travel W/w = 200/5 = 40 times
Speed of tool, v = 100 mm/s
[tex]Time/pass = \frac{40*400}{400} \\Time/pass = 40 sec[/tex]
minimum time required to reduce the depth of the plate by 20 mm:
[tex]T_{min} =[/tex] number of passes * Time/pass
[tex]T_{min} =[/tex] n * Time/pass
[tex]T_{min} =[/tex] 40 * 40
[tex]T_{min} =[/tex] 1600 = 26 mins 40 secs
Answer:
the minimum time required to reduce the depth of the plate by 20 mm is 26 minutes 40 seconds
Explanation:
From the given information;
Assuming the tool moves 100 mm/sec
The number of passes required to reduce the depth from 30 mm to 20 mm can be calculated as:
Number of passes = [tex]\dfrac{30-20}{0.5}[/tex]
Number of passes = 20
We know that the width of the tool is 5 mm; therefore, to reduce the depth per pass; the tool have to travel 20 times
However; the time per passes is;
Time/pass = [tex]\dfrac{20*L}{velocity \ of \ the \ feed}[/tex]
where;
length L = 400mm
velocity of the feed is assumed as 100
Time/pass [tex]=\dfrac{20*400}{100}[/tex]
Time/pass = 80 sec
Thus; the minimum time required to reduce the depth of the plate by 20 mm can be estimated as:
[tex]T_{min} = Time/pass *number of passes[/tex]
[tex]T_{min} = 20*80[/tex]
[tex]T_{min} = 1600 \ sec[/tex]
[tex]T_{min}[/tex] = 26 minutes 40 seconds
