narutoseries
contestada

2 Blocks 1 and 2 rest on rough surfaces with coefficient of frictions ¢1 and ¢2 respectively. The blocks
are connected by a cable that runs over a smooth pulley and are in equilibrium as shown below with the following values.

W2 = 50N
thetha 1 = 30 degrees
thetha 2= 40 degrees
¢1= 0.3
¢2= 0.25

a. If Block 2 is on the verge of sliding down the plane, what is the minimum weight W1, required for equilibrium?
b. If Block 2 is on the verge of sliding up the plane, what is the minimum weight W1, required for equilibrium
? Do not consider overturning.
​

2 Blocks 1 and 2 rest on rough surfaces with coefficient of frictions 1 and 2 respectively The blocksare connected by a cable that runs over a smooth pulley and class=

Respuesta :

Answer:

  • 100N
  • 25N

Explanation:

a) On the verge of tipping over, reaction acts at the corner A

When slippage occurs,

Block moves w/ const. velocity  equilibrium

Three-force member: reaction at A must pass through B

tan b/2h, h b/ 2 θ µ = = ∴= k k ( µ )

b) When slippage occurs,

Block moves w/ const. velocity  equilibrium

Three-force member: reaction at C must pass through G

k tanθ µ =

tan x/ H/2 , x H/2